Our Sauna wood with thin slate veneer (Haptic surface) sets in saunas of any kind, infrared cabins and rest and recreation areas or generally as a finished Decorative veneer Accents in the modern sauna construction. Although the sauna wood is exposed to extreme stress, the Wood panels design with the highest technical standards, which is why the Wood panel does not emit formaldehyde even at sauna temperatures. The reason for this is the finest craftsmanship in the production process, as the extraordinary appearance of the Slate veneer is provided with a carrier layer reinforced with fiberglass and resin.
The sauna wood with Thin slate Surface and unique Haptics is available with 12 different Veneers available in matte and glossy appearance.
The Variegated slate Sauna panel Tan captivates with its flowery pattern, which extends over the matt and smooth Outside in cream-beige basic color. The smooth patterned surface of the natural stone veneer transforms any wellness area into an absolute highlight and shines in the sauna as a unique one-of-a-kind.
"Heat and moisture resistant
"No emitting pollutants in the gluing according to test certificate ÖNORM 6219-1
"No exotic wood - resource-saving
" high screw pull-out resistance for optimal fastening
"Many design possibilities (large and small panels)
"Large format (optimization; less waste than small formats, e.g. back panel up to the bench without joint)
High-quality private, public and commercial sauna, infrared, heat cabin or wellness facility construction (interior finishing of cabins). Can also be used for bio-saunas or vaporizer saunas with appropriate post-drying and ventilation of the system (short-term max. 60 - 70% humidity). Not suitable for wet cells and steam chambers (100% humidity). Can also be used in the furnace area (observe the furnace manufacturer's information on distances).
The sauna panel with real stone veneer can be cut with all standard cutting machines. For fixing the sauna wood we recommend a combination of gluing and screwing the panel elements (panels). Due to different sauna constructions of the processors we advise to check this in advance and to process accordingly
to process accordingly.
d4 of the latest generation according to din en 314 part 2 class 3. The gluing quality in terms of water resistance and temperature resistance were tested under laboratory conditions for sauna suitability over a significantly long period.
Knife veneer face layers joined in solid character.
Plywood construction (rotary cut veneer) made of European aspen (no exotic wood!).
Thin slate real stone with 1,0-1,4mm thickness. Support layer of glass fiber and resin with 2-5mm thickness to ensure the stability of the stone.