Choose your country of delivery to see prices and products for your location.
Choose tax zone / country of delivery
Please note the minimum purchase quantity of 28 Units.
Please note the permissible order quantity of 3.5 Units.
Split quantity allowed for this item (e.g. 0.5).
Our Sauna wood with the sunburned solid wood veneer (Haptic surface) sets in saunas of any kind, infrared cabins and rest and recreation areas or generally as a finished Dekoholz Accents in the modern sauna construction. Although the sauna wood is exposed to extreme stress, the Wood panels design with the highest technical standards, which is why the Wood panel does not emit formaldehyde even at sauna temperatures. The sauna wood with structured surface and unique Haptics is available with 12 different Veneers are available.The haptic-embossed Sauna panel made of solid old wood is distinguished by its uniquely distinctive veneer with a gray, sunburned exterior that has been under the very strong influence of nature. The particularly textured surface of the rustic reclaimed wood is suitable for the sauna that wants to stand out in a very special way.Advantages: "Heat and moisture resistant"No emitting pollutants in the gluing according to test certificate ÖNORM 6219-1"No exotic wood - resource-saving (carrier plate)"6mm thick solid wood slats"Large formats (optimization; less waste than small formats)
Field of application:High-quality private, public and commercial sauna, infrared, heat cabin or wellness facility construction (interior finishing of cabins). Can also be used for bio-saunas or vaporizer saunas with appropriate post-drying and ventilation of the system (short-term max. 60 - 70% humidity). Not suitable for wet cells and steam chambers (100% humidity).
Fastening:For fixing the sauna wood, we recommend a combination of gluing and screwing of the panel elements(panels). Due to different sauna constructions of the processors, we advise to check this in advance in case of deviating fastening and to process accordingly. In the case of soft woods, thick veneers as well as old woods, we recommend brushing the panels before installation to prevent subsequent peeling and splintering of these woods.
Top layer:6mm thick solid wood slats made of genuine sunburned wood.Inner layer:Plywood structure (rotary cut veneer) made of European woods (no exotic wood!)
Please see our privacy notice
