Maple Wooden Panel With Massivholzcharakter – Sauna Board Plus

Maple Wooden Panel With Massivholzcharakter – Sauna Board Plus

SKU: 455-2001
GTIN: 4260542114832
HAN: 2001
Category: Sauna wood with solid wood character
Manufacturers: JGrabner

high quality elegant smooth maple wood for use as a Decorative wood or Sauna wood
- sustainable Veneer laminated wood panel
- especially robust Veneer layer -> special suitability for beveled, rounded edges
- heat and moisture resistant Sauna wood
- Warranty: 10 years or 12000 hours of operation
- Size: 250 x 125 x 1,7 cm = 3,125 m²

218,96 €

incl. 19% VAT , plus

Choose tax zone / country of delivery

Available immediately
Delivery time: 7 - 9 weeks (DE - int. shipments may differ)

Please note the minimum purchase quantity of 25 Units.

Please note the permissible order quantity of 3.125 Units.

Split quantity allowed for this item (e.g. 0.5).

Description

Format/panel: 250 x 125 x 1.7 cm; 3.125 m²

Information
Saunaboard Plus has a thicker top layer (1.5 mm dovetailed veneer). This makes the top layer even more resistant and gives the sauna a character reminiscent of rustic solid wood. It is especially suitable for beveled or rounded edges, as it does not tend to splinter.?

The advantages

many design possibilities (large and small panels)
wide choice of wood species and surface structures
no emitting pollutants in the gluing process?
Inner layer made of compact aspen or alder wood (sauna wood); therefore high screw pull-out resistance for optimal fastening
no exotic wood
Inner layer color matches the ceiling veneer layer
on request FSC^®?or PEFC certified
large formats, less waste
increased stability due to more layers
Quality
a/Blind
Front side a = visible quality
Back side blind = blind veneer without quality claim

Joining method
Knife veneer top layers (1.5 mm) joined in solid character.

Gluing
d4 according to din en 314 part 2 class 3
Water resistance and temperature resistance were tested under laboratory conditions for sauna suitability over a long period of time.?

Place of use
High-quality sauna, infrared, heat cabin construction. also for bio and vaporizer saunas when properly dried and ventilated. The humidity must not exceed 70% in the long term!
Not suitable for wet rooms with 100% humidity.?

NOTE from the manufacturer:?
This board does not comply with önorm 6291-1, as more formaldehyde is emitted due to the thicker wood. This is due to the natural ingredients of the wood.?

Manufacturer's recommendation:
For fixing the sauna boards, we recommend a combination of gluing and screwing the panel elements (panels).?
Due to different sauna constructions of the processors, we advise to check this in advance in case of deviating fastening and to process accordingly
In the case of soft woods, thick veneers and old woods, we recommend brushing the panels before installation to prevent subsequent peeling and splintering of these woods.