Format/panel: 250 x 125 x 1.65 cm; 3.125 m² / Usable area: 235 x 120 cm
Information
Our recommendation for dark saunas. The Dukta sauna panel is perfect for use in commercial saunas. It has a high sound-absorbing and climate-regulating effect due to its special milling. The honeycomb-like incision of the alder wood support board makes the Dukta sauna board flexible and makes it a special eye-catcher by backlighting on benches, backrests, headrests and as a privacy screen. Thus, walls and ceilings in sauna, BIO sauna and vaporizer sauna can be individually corrugated and bent
The advantages
- attractive appearance - many design possibilities due to flexibility for round benches and corrugated side walls
- highest absorption values, improvement in large-capacity saunas, optimal room design with shapely appearance
- available on request as finished ceiling, wall element
- emits no harmful substances, complies with ÖNORM 6219-1
- Inner layer made of compact alder wood, high screw pull-out resistance
- no exotic wood
Quality
a/Blind
Front side a = visible quality
Back side blind = blind veneer without quality claim
Inner layer
Plywood construction (rotary cut veneer) of European alder
Top layer
Sliced veneer top ply approx. 0.6 mm (hardwood) and 0.8 mm (softwood)
Gluing
d4 according to din en 314 part 2 class 3
Water resistance and temperature resistance have been tested under laboratory conditions for sauna suitability over a long period of time
Application
Can be used in the construction of high-quality wellness facilities. Suitable for interior finishing of sauna cabins, heat cabins and infrared cabins. Also for BIO saunas and vaporizer saunas (short-term max. 60 - 70% humidity) when properly dried and ventilated. Not suitable for wet rooms and steam cabins
Surfaces
Available with different veneers. Oak, hemlock, aspen, American walnut
Manufacturer's recommendation:
For fixing the sauna boards, we recommend a combination of gluing and screwing the panel elements (panels)
Due to different sauna constructions of the processors, we advise to check this in advance in case of deviating fastening and to process accordingly
In the case of soft woods, thick veneers and old woods, we recommend brushing the panels before installation to prevent subsequent peeling and splintering of these woods.
